Floor Cleaning keeps a facility clean and helps reduce accidents and illness that can occur due to dirt, bacteria and debris. Different flooring types require specific cleaning techniques, cleansers and tools. 매트리스청소업체
For example, linoleum floors can be cleaned with a mop and bucket of clean water and soap. Dunk the mop and wring it out frequently to avoid spreading dirty wash water on the floor.
Dirt and Grease
Grease and grime can be extremely slippery on floors. It is also one of the most difficult soils to remove from the floor. Those in charge of cleaning can tackle this problem by ensuring floors are regularly cleaned, and that they are using the right products to clean them.
Baking soda is a natural degreaser that can be used on hardwood floors to clean stubborn grease spots. This is because baking soda acts as a mild abrasive, which helps to scrub away the stuck on grease and grime without damaging the floors. Mixing white vinegar and water is another great option for removing grease stains. This solution acts as a strong degreaser and is gentle enough to use on laminate floors. It is important to rinse the floors with clean water after using either of these solutions, as this will help to remove any residue and prevent the spread of bacteria.
Restaurant kitchen floors see a lot of grease. Staff dashing about, drinks and condiment spillages, and food debris can all contribute to a very greasy floor. Ideally, this type of floor should be mopped on a daily basis with a product that is specifically formulated to address grease and kill odor-causing bacteria. The regular use of a bio-enzymatic cleaner and degreaser can cut down on the amount of manual labor needed to keep a facility clean, while also providing a safer environment for staff and patrons.
Mold and Mildew
Mold and mildew thrive in moist, dark areas, where they can eat organic materials like paper, leather and wood. These growths are notorious for giving off a musty smell and can cause illness in some people, especially those with existing respiratory conditions.
The most common signs of a mildew problem are a musty smell or visible growths on surfaces like shower walls, windowsills or drywall. Mold, on the other hand, can be more difficult to identify because it can vary in color and texture. “There are more than 100,000 species of mold in existence, and they can look fuzzy, raised, powdery or velvety,” says Rubino. “Mold can also come in shades of gray, black, green, red and brown.”
Both mold and mildew grow when organic material is left exposed to a damp environment for long periods of time. They can then start to rot and discolor the material they are growing on, including wood floorboards.
To prevent the growth of mold and mildew, sweep the area and vacuum up all dirt to prevent spores from spreading in the air. Dry the affected area by directing fans and running dehumidifiers. If the mold is in a wall or on the surface of wood, Rodriguez recommends mixing borax (an alkaline mineral salt) and water and spraying it onto the surface. Wait 30 minutes, then scrub and rinse the surface.
Dust and Dirt
Dust isn’t just a cosmetic nuisance, it can also aggravate allergies and asthma. It contains fine particles from cloth fibers, paper, skin cells, and other substances and can be deposited on surfaces when air moves them. Regular vacuuming, especially with a quality hose with a brush attachment, is an effective way to remove the vast majority of dust. Mopping is also an option if a facility doesn’t want to invest in a vacuum cleaner. A microfiber mop with a small amount of vinegar or other degreaser is an efficient tool for removing stubborn dirt buildup. The acid in the vinegar helps break down the oil in dirt and grease, making it easier to wash away. Be careful not to use too much water and saturate the floor; this can damage some floors.
If a floor is particularly dirty, a mild detergent or pH-neutral soap can be used. A small amount of cleaning solution can be added to a bucket of warm water and used to mop the floor. Be sure to read a cleaner’s label carefully to determine the proper dilution ratio.
For example, if you have linoleum floors, you may find it beneficial to mix one cup of white vinegar with two gallons of warm water. This solution is a natural degreaser and grime cutter and can be enhanced with a few drops of essential oils for a pleasant scent. Having people take off their shoes at the door can also help eliminate tracked in dirt and prevent it from being redistributed throughout a facility.
Pet Hair
Even the best-behaved pets can shed a lot of hair on hardwood floors. This can make your home a little harder to keep clean, especially during shedding season. However, with a few cleaning tips and tricks you can easily keep your floor dog hair free.
For example, instead of sweeping, vacuum your hardwood floors with a dusting attachment or hard flooring setting on your vacuum cleaner. This will eliminate more of the hair than sweeping and can also help you avoid damaging your floors. A rubber broom is another useful tool for removing pet hair from your floors. It is effective because the rubber bristles attract and collect hair without damaging the floor. Just be sure to wash and dry the broom frequently.
Vacuuming also works well on carpets and rugs, but shampooing or steam cleaning your carpets twice a year can get rid of even more pet hair than just vacuuming. To make this process easier, use a hose extension to reach the corners of your room.
If you’re not comfortable using a vacuum or mop, try wearing an anti-static pair of rubber gloves to sweep and dust your floors. This will prevent the pet hair from blowing onto other surfaces and making your work more difficult. You can also try rubbing dryer sheets over your floors to create an electrostatic force that will collect the hair.